Thinkware Q1000 Pro QHD 2K Front and Rear Dash Cam

£349.00£439.00

  • 2K QHD Front Camera
  • Rear HD 2K camera
  • 140ยฐ Wide Angle View
  • G-Sensor Incident Detection
  • Speed Camera Alert
  • Cloud Service
  • Built-in WiFi
  • HD Rear Camera
  • Super Night Vision 2.0
  • Time Lapse Mode
  • Format Free
  • Win/Mac Viewer
  • Mobile App โ€“ Android or iOS
Clear

Description


The Thinkware Q1000 front and rear camera package has the following items:

  • Q1000 QHD 2K dashcam
  • Cigarette lighter power lead or
    Hardwire Lead
  • Rear Camera with mounting bracket
  • 6 metre extension cable for rear camera
  • Mounting bracket
  • 32GB memory card
  • User manual
  • Cable clips
  • Spare mounting pad

The Q1000 model from Thinkware comes with a low profile and modern design.
The Q1000 features a 2K QHD front-facing camera and an optional 1080p Full HD rear-facing camera.

Quad HD (2560ร—1440)
4x more vivid than HD resolution, 1440P QHD captures every little detail you may have missed before

The Q1000 also incorporates โ€˜Super Night Vision 2.0โ€™, a night image correction feature in addition to Thinkwareโ€™s Cloud features, built-in A-GPS and โ€˜Safety Camera Alertsโ€™.

Comes with a FREE CPL Polarising Filter*
*Filter only, no cleaning cloth included.

 

FRONT AND REAR VIEW FULL HD RECORDINGS
The Q1000โ€™s Image Sensors allow constant front 2K QHD resolution recording during both daytime and nighttime along with a 140-degree wide angle lens view. This will minimize blind spots to assure recording of all events without fail.

SUPER NIGHT VISION 3.0
DASH CAM videos recorded in a low-light environment, such as dark alleys or car parks, may not be clearly identifiable.
SUPER NIGHT VISION3.0 in the Q1000 uses Image Signal Processing (ISP) technology to record a clear, visible video in any situation- whilst driving or parked.

SONY EXMOR Rย STARVIS IMAGE SENSOR
Perfect image processing even in low-light environments.
The Sony Exmor R STARVIS Image Sensor applied to the Q1000 provides rich colours and the optimal resolution.
STARVIS technology improves Exmor Rโ€™s low light sensitivity by providing optimal image quality in visible ray and near-infrared range, allowing clear imaging in low light environments.

ENERGY SAVING PARKING RECORDING
Energy saving parking recording will reduce power consumption by a 1/3 and gives 3x longer video recording than normal parking mode.
When you are away for on holiday or leaving your car for quite some time, energy saving parking recording is a recommended solution.
When in use, Q1000 will go to sleep and soon after an impact has been detected by the built-in G-senor, Q1000 will wake up within a second and start recording for the next 20 seconds.

TIME LAPSE
Important clips and images may get deleted due to insufficient memory space during long continuous recordings, especially in standard parking recording mode which requires large memory for saving 15 to 30 frames per second.
TIME LAPSE MODE in the Q1000 records 2 frames per second reducing the size of the video file. This allows video recordings in parking mode to continue up to 16 times longer than other dash cams.
* Parking recording mode can be activated when installing the Q1000 with the hardwire cable. It will not operate when using the cigarette lighter lead “plug and play” option.

GEO-FENCING
Geo-Fencing allows drivers to stay alert of the vehicle location. Whether your vehicle goes in/outside of a certain radical area, Q1000 will send you a push notification through the mobile app, THINKWARE CLOUD. This is more practical for parents, rental companies, and for fleet management. The radius can be set by typing the address or by using pinpoint on the mobile app. You may set 20 different radial areas with the size from 100m up to 600km. WiFi hotspot required.

LOCATE VEHICLE
Locate Vehicle will help drivers to find the vehicleโ€™s current location. The Q1000 will update its current location every 10 seconds. Then it will display current location with speed and the heading direction integrated on a google map. WiFi hotspot required.

DRIVING IMPACT NOTIFICATION
In the event of a crash, the alert feature can help the driver to notify others of an emergency situation when the driver is not in the condition to do so. The family or the owner of the car can then remotely check on the situation from their location.
When the car experiences an impact with a g-force level greater than 3g or 4g while driving, the dash cam will automatically send a push notification alert of the impact to the userโ€™s smartphone logged in to the THINKWARE CLOUD app.
A 20 seconds video of the incident (10 seconds before and after the incident) is also saved on the THINKWARE CLOUD server, and a push notification alert of the video is sent to the user, which can be checked later and downloaded from the app. WiFi hotspot required.

SAFETY CAMERA ALERT
The THINKWARE DASH CAM Q1000โ€™s internal GPS provides accurate location information while the Safety Camera Alert function is on continuous alert to warn the driver of red lights and traffic enforcement cameras.

  • RED LIGHT WARNING SYSTEM
  • SPEED CAMERA WARNING SYSTEM
  • RED LIGHT & SPEED CAMERA WARNING SYSTEM
  • AVERAGE SPEED WARNING SYSTEM
  • MOBILE ZONE WARNING SYSTEM
  • ROAD SAFETY WARNING SYSTEM

The THINKWARE DASH CAM Q1000 is equipped with the Lane Departure Warning System (LDWS), Front Collision Warning System (FCWS), Urban Front Collision Warning System(uFCWS) and Front Vehicle Departure Warning (FVDW) to ensure driver safety with a voice warning.

Lane Departure Warning System (LDWS)
Drowsy or distracted driving greatly increases the chance of an accident on the road.
The Lane Departure Warning System will alert the driver when the vehicle goes off the lane in a speed over 50 km/h.

High Speed / Urban Forward Collision Warning System (FCWS/ uFCWS)
Accidents can be avoided by maintaining a safe following distance. Road Safety Warning System in the Q1000 calculates the real-time distance between your vehicle and the vehicle in front of you while driving above 30 km/h on single / dual carriageways and motorways or under 30 km/h in a busy city, and issues a 3-level early warning to the driver depending on the danger of collision.

Front Vehicle Departure Warning (FVDW)
When your car is stopped at a junction or in traffic, the intelligent guidance system informs you that the vehicle in front has started to move, preventing a delayed response just in case you stop looking ahead.

VIDEO ENHANCEMENT TECHNOLOGY
THINKWARE DASH CAMs are equipped with top-notch video enhancement technology on the market, ensuring the most vivid video recordings under any circumstance.

WIDE DYNAMIC RANGE
When you are driving under bright sunlight, coming out of a tunnel, or getting under the shadow of a tall building etc, a sudden change in light exposure levels can result in excessively bright or dark recordings.
The WDR function eliminates excessively bright spots on the recording to correct its colour balance in order to ensure a clear image.

NIGHTTIME PICTURE QUALITY CORRECTION
Images from the videos recorded during nighttime driving on dark streets are generally difficult to make out.
The enhancement Sensors of THINKWARE DASH CAMs come with a standard function of brightness and colour control as well as noise cancellation.

AUTOMATIC EXPOSURE
A sudden rise of light exposure caused by strong sunlight or headlight beams of the oncoming vehicle may cause difficulties to assess the situation. Also, the lack of lighting in a dark tunnel or night driving may pose the same problem.
The automatic light exposure function controls the level of light exposure to maintain vivid and clear video recordings in all circumstances.

Multiple AUTONOMOUS RECORDING MODES
Multiple Recording Modes and Automatic Switch between Modes

Continuous Recording Mode
This mode is activated automatically when you start the engine. Recorded videos are saved in one-minute segments with an auto-looping mechanism.

Incident Recording Mode
The Active Impact Monitoring System will automatically store the video data ten seconds prior to and after a collision registered by the 3-axis G-Sensor.

Manual Recording Mode
Similar to a video camera, you can use the Manual Recording Mode to capture events that occur in front of your vehicle whether or not it is in motion.

Energy Saving Mode
The dash cam will go to sleep and soon after an impact has been detection by built-in G-senor, Q1000 will wake up within a second and start recording for next 20 seconds of the period.

CHECK RECORDED IMAGES AND UPDATE FIRMWARE USING SMARTPHONES
Your smartphone and the Q1000 can be connected via the exclusive application โ€˜THINKWARE DASH CAM Mobile Viewer for Q1000โ€™ with built-in Wi-Fi in the navigation. Check, download or delete recorded images, update firmware or update safe driving information on the application.

Viewer for Checking Clear and Precise Video

The intuitive and simple-to-use interface of THINKWARE DASH CAM allows you an easy and convenient viewing of your recorded videos.
Through the Windows or Mac viewer, you can playback and download recorded videos along with your route history and speed record.
You can also change the dash cam settings, format the memory card, or install updates with just a few clicks on the viewer.

Comprehensive Driving Data Through Built-In GPS

Using the GPS data in Q1000, it can precisely pinpoint the vehicleโ€™s location and routes with its driving speed on the map.
The GPS helps you accurately assess the status of the accident by providing you with the vehicle speed,
the direction of the collision and the severity of impact. The DASH CAM not only records driving footage
but can also be used to track and recall past driving routes whether it be work or holiday routes.

*The Q1000 comes with built-in GPS

High-temperature Protection System

The specially designed heat discharge construction and the built-in thermal sensor of the Q1000 protect
the device and its data against intense heat by automatically turning it off to prevent overheating.

external

 

Additional information

Weight .8 kg
Q800 pro 2ch options

Cigarette Lighter Power Lead, Hard Wire Power Lead

Dashcam installation

Front and Rear Camera Installation, No Installation

Reviews

There are no reviews yet.


Only logged in customers who have purchased this product may leave a review.