39-FIA-03 – Fiat Steering Wheel Interface 52 Pin

Description

Stalk interface for various Fiat, Alfa and some Peugeot Vauxhall models 2015 to 2023 – check list further down the page.
** IMPORTANT *** You MUST check connector type as they can vary.
The correct connector is rectangular and has a rotating release bar.

Compatible when replacing VP1 & VP2 factory stereos. Configuration is set by DIP switches at time of installation. This will stop the flashing odometer issue when replacing the factory stereo.

Allows replacement of original stereo with aftermarket unit form Pioneer, Kenwood, Alpine, Sony, JVC and non-branded units.
Simple “plug and play” connection.
It is supplied complete with instructions and a universal patch lead to connect to the steering control input of the above head unit brands

Converts Fiat 52 way connector to 8 pin ISO plugs – power and speaker connections

Phone button support is dependent on the stereo Make & Model.

This interface will also stop odometer flashing when stereo is being replaced – ONLY compatible with the VP1 and VP2 Fiat units (model No. is on label on top of the stereo).

DIP switches in the interface must be set to select correct Fiat stereo type.

Vehicle Compatibility:

Abarth – 500 (2016 – 2022)
Alfa Romeo – Giulietta (Type 940) (2010 – 2020)
Alfa Romeo – Mito (Type 955 Facelift) (2014 – 2018)
Citroën – Relay 3 facelift (2014 >)
Fiat – 500 1st Gen Facelift (2016 – 2021)
Fiat – 500L 1st Gen (2013 – 2018)
Fiat – Doblo 2nd Gen Facelift (2015 – 2021)
Fiat – Ducato 3rd Gen Facelift (X290) (2014 – 2021)
Fiat – Ducato 3rd Generation Series III (X290) (2021 >)
Lancia – Ypsilon 3 Facelift (2015 – 2021)
Peugeot – Boxer 3 facelift (2014 >)
Vauxhall – Movano (2022 >)