CTSFA019.2 – Fiat Steering Wheel Interface

Description

Stalk interface for Fiat Ducato 2015 to 2021 ** IMPORTANT *** You MUST check connector type as they can vary.
The correct connector is rectangular and has a rotating release bar.

Compatible when replacing VP1 & VP2 factory stereos. Configuration is set by DIP switches at time of installation. This will stop the flashing odometer issue when replacing the factory stereo.

Allows replacement of original stereo with aftermarket unit form Pioneer, Kenwood, Alpine, Sony, JVC and non-branded units.
Simple “plug and play” connection

Converts Fiat 52 way connector to 8 pin ISO plugs – power and speaker connections

Phone button support is dependent on the stereo Make & Model. Pioneer, Kenwwood, Alpine, Sony and Chinese units are supported
Please note that for the Pioneer A240, A340 units you must order a specific patch lead. Either CTPIONEERLEAD.2 or CTMULTILEAD.5
For other units you will require a CTMULTILEAD.2

This interface will also stop odometer flashing when stereo is being replaced – ONLY compatible with the VP1 and VP2 Fiat units (model No. is on label on top of the stereo).

DIP switches in the interface must be set to select correct Fiat stereo type.

Vehicle Compatibility:

Fiat Ducato 2015 2021 OEM Specific
Fiat Doblo 2016 2021 OEM Specific
Fiat 500L 2012 2021 OEM Specific
Dodge RAM-Promaster 2014 2021 OEM Specific