Sprinter and Crafter Reverse Camera – 3rd Brakelight

Description

Reversing camera designed specifically for use with the Mercedes Sprinter (2006-2020) and the Volkswagen Crafter (2006-2020). It’s unique design means that no holes need to be drilled when mounting; the camera will simply replace your existing rear high level brake light located at the top of the rear doors, integrating seamlessly with the lights original mounting clips/screws.
During installation the brake light PCB will need to be transferred from old brake light housing – it is held in by clips.

The camera is designed to replicate the size and shape of the existing high level brake light but with the addition of a precision angled camera.

Once correctly installed, the camera will automatically power on as soon as the vehicle is put into reverse delivering a NTSC video signal via the included 10 metre RCA video cable signal to any monitor with an RCA reverse camera input

The camera is also compatible with any aftermarket car head unit with a suitable video input. If your aftermarket head unit has a dedicated camera input then the camera can be set up so that the rear-view image can be automatically displayed as soon as the car is put into reverse.

The camera is not designed for use with original factory-fitted monitors or OEM displays, as vehicle manufacturers do not design their equipment with the required RCA video inputs used by aftermarket cameras.

Camera dimensions: (310mm between screw holes, 32mm wide)

Specification:

·         Lens Angle: 140 Degrees

·         Resolution: 420 TV Lines

·         Night Vision Distance: 45 feet

·         NTSC

·         DC: 12 Volt

·         4 Pin Connector

·         Connection Video RCA

Package includes:

1 x camera

1 x Power cable

1 x 4 Pin to AV Converter

1 x 10m Extension AV Video Cable