ICT20280 – Active Adaptor Saab 9-5 with Denso Navigation

Description

Used to install a new radio in a Saab 9-5 that has the Denso SatNav and an original fit amplifier.

Compatible with Saab Denso 8057 head-unit

This interface converts the high level audio output of a new head unit to a low level pre-amplified signal which will work with the factory amplifier.
4 channel adjustable output for optimum audio quality. There is a built-in ground loop isolator and filters to get the best sound from the amplifier.

This lead converts to Saab 16 + 16 pin connectors as found on the Denso SatNav unit to 8 way ISO connectors.
The original connector blocks are 16 pin, coloured Black, Grey and Green

Always ensure that you connect the remote turn on wire from the new aftermarket radio to the Blue / white wire on this interface, otherwise there will be no sound. Also, the levels from the interface will be set to minimum when supplied. You will need to set the levels using a small screwdriver.

Vehicle Compatibility:
Saab 9-5 MK1 facelift (2006 – 2010) with Denso SatNav

Additional information